The 66R vapor recovery regulators respond to changes in blanket gas pressure and throttle open or closed to control the flow of the blanket gas out of the vessel. A vacuum source on the outlet of the regulator can be used to increase flow capacity of low-pressure blanket gas out of the vessel into a vapor disposal or reclamation system. The Type 66R uses a pilot to decrease buildup and provide even higher accuracy.
For your Total Tank Management solutions, click here!
If you would like access to downloadable CAD drawings, please
login or
register.
Body Sizes and End Connection Styles
Cast Iron2-inch (DN 50) body size NPT or 125 FF end connections
3-inch (DN 80) or 4-inch (DN 100) body size 125 FF end connections
Steel or Stainless Steel
2-inch (DN 50) body size NPT or 150 RF end connections
3-inch (DN 80) or 4-inch (DN 100) body size 150 RF end connections
Pressure Registration
Type 66R: Internal (Standard) or External
Type 66RR: External
Set Pressure Ranges
Type 66R: 2-inches w.c. to 3 psig (5 to 207 mbar) in six ranges
Type 66RR: 3-inches w.c. to 3.25 psig (7 to 224 mbar) in seven ranges
Temperature Capabilities
Nitrile: -20 to 180°F ( -29 to 82°C)
Fluoroelastomer (FKM): 40 to 300°F (4 to 149°C)
Additional Technical Data
For additional technical information,
contact your Local Sales Office or refer to technical documentation.
|
Support/Locator/Training |
RFQ/Drawings |
Technical Reference |
What's New |
Site Map |
My Help |
